1.手机壳厚度<2mm,将设备放置在无线充电器面板中心,需等待15~30秒,方可正常充电,如偏离 将会影响充电效率或断充。
2.建议充电环境温度低于 28℃,高于此温度会导致充电效率降低。
3.请勿自行拆卸、改装和修理无线充电器的任何部分,否则将无法进行正常的售后。
4.请勿将磁条卡(如信用卡、电话卡等)、某些医疗设备(如起博器、助听器等)、以及一些金属物件 (如钥匙、手机壳金属卡扣)与本品放在一起,可能会引起磁条损坏或设备运转失常。
5.市面上大部分手机的保护温度为30多度。安卓机在36℃左右,苹果机在32℃以内。高于此温度后, 为了保障电池和手机的安全,手机自身可能会降低充电功率/禁止充电/充电断断续续/越充越少等。
6.无线充电,受电设备需要支持握手才能工作,部分蓝牙耳机是双线的充电接口不能充电。
7.不建议电动摩托车和电动车安装。
8.工作中输入电压<11.5V超过3分钟,将会自动关机。连续5分钟未检测到与手机的交互操作时,充电器 将调整至关闭状态,长按2秒开关可启动设备。
9.在为苹果手机设备充电时,若摩托车(本田 NS125LA)配备无钥匙启动系统,可能会遭遇到钥匙信号 的干扰或异常。
1. If the phone case is less than 2mm thick, place the device in the center of the wireless charger panel and wait 15 to 30 seconds for charging.
2. It is recommended to charge in an ambient temperature lower than 28°C.
3. Do not disassemble, modify, or repair any part of the wireless charger by yourself, as it may affect after-sales service.
4. Do not place magnetic stripe cards, medical devices (such as pacemakers or hearing aids), or metal objects (such as keys or metal clips) near the product, as it may cause damage or abnormal operation.
5. High ambient temperatures may reduce charging power or stop charging to ensure battery and phone safety.
6. The powered device must support handshaking for wireless charging to work; some Bluetooth headsets with dual-wire interfaces cannot be charged wirelessly.
7. Not recommended for use with electric motorcycles and vehicles.
8. The charger will automatically shut down if the working voltage is < 11.5V for more than 3 minutes, or if there is no interaction with the phone for 5 consecutive minutes. To start the device, long press the switch for 2 seconds.
9. Charging an iPhone on a motorcycle (Honda NS125LA) equipped with a keyless start system may cause interfe- rence or abnormal key signals.